Teknetics EuroTek Pro Metal Detector

The Teknetics EuroTek Pro Metal Detector is a lightweight, high-performance detector designed for relic hunting, coin shooting, and jewelry hunting. Operating at 7.81 kHz, the EuroTek Pro combines excellent target separation with advanced iron-identification features, making it particularly effective in areas where desirable targets are mixed with iron and other metal debris.

The EuroTek Pro comes equipped with an 11" Double-D (DD) waterproof search coil, providing excellent ground coverage and strong depth performance. The DD coil is also well suited to mineralized soil, helping maintain stable operation in challenging ground conditions.

With features including FeTone adjustable iron audio, V-Break variable tone discrimination, an Iron Identifier LED, adjustable sensitivity and discrimination, pinpointing, and a 5-segment depth indicator, the EuroTek Pro gives detectorists useful control over how targets are identified and recovered.

Key Features

• 7.81 kHz Operating Frequency – Provides versatile performance for coins, jewelry, relics, and general-purpose detecting.

• 11" DD Waterproof Search Coil – Provides increased ground coverage, depth capability, and improved performance in mineralized soil.

• FeTone Adjustable Iron Audio – Allows ferrous targets to be heard at a lower volume than non-ferrous targets, helping desirable targets stand out.

• V-Break Variable Tone Breakpoint – Allows you to customize the audio response and tone breakpoint for different target ranges.

• Iron Identifier LED – Provides a visual indication when the detector identifies an iron target, even when iron is being discriminated out.

• Adjustable Discrimination – Discrimination can be adjusted from 0–79 to customize the detector's response to unwanted targets.

• Adjustable Sensitivity – Ten sensitivity levels allow you to fine-tune performance for different detecting conditions.

• 3-Tone Audio ID – Provides different audio responses for different target ranges.

• No-Motion Pinpoint Mode – Helps narrow down the location of a detected target for more precise recovery.

• 5-Segment Depth Indicator – Provides an estimated target depth to help determine how deeply to dig.

• Lightweight Design – At approximately 2.4 lbs, the EuroTek Pro is comfortable to swing during extended hunts.

• Ergonomic S-Handle – Provides a comfortable grip and balanced feel during detecting.

• Single 9V Battery – Provides approximately 20–25 hours of typical operation.

11" Waterproof DD Search Coil

The EuroTek Pro's 11" Double-D search coil provides a larger detection footprint than smaller coils, allowing you to cover more ground with each sweep.

The DD configuration also provides advantages when detecting in mineralized soil, while the larger size can help with detecting deeper targets and searching larger areas efficiently.

The coil is waterproof and can be used in wet environments and shallow water. The detector's control housing should not be submerged.

FeTone Adjustable Iron Audio

One of the EuroTek Pro's standout features is FeTone, which allows you to adjust the volume of ferrous target responses.

Instead of completely eliminating iron responses, you can reduce their volume and continue to hear them at a lower level. This can be useful at old sites and other iron-infested locations where desirable targets may be located close to iron.

V-Break Variable Tone Discrimination

The V-Break system provides variable tone-break control, allowing you to customize how the detector responds to different target ranges.

This gives experienced users additional control over the detector's audio response while maintaining a straightforward interface for everyday detecting.

Iron Identifier LED

The EuroTek Pro features an Iron Identifier LED that illuminates when an iron target is detected.

This visual indicator works independently of the discrimination setting, giving you another way to identify potential iron targets without relying solely on the detector's audio response.

Adjustable Discrimination & Sensitivity

The EuroTek Pro provides extensive adjustment of its primary detecting controls.

Discrimination can be adjusted from 0–79, allowing you to reject unwanted target ranges, while 10 sensitivity levels allow you to optimize detector performance according to ground conditions and electromagnetic interference.

These adjustments make the EuroTek Pro adaptable to parks, fields, old sites, and other detecting environments.

Pinpoint & Depth Indicator

The built-in no-motion pinpoint mode helps you determine the approximate center of a detected target before digging.

The 5-segment depth indicator provides an additional estimate of target depth, helping you decide how much soil may need to be removed during target recovery.

Lightweight & Ergonomic

At approximately 2.4 lbs, the EuroTek Pro is designed to remain comfortable during longer detecting sessions.

Its ergonomic S-handle and locking stem collars provide a secure and adjustable setup, making it easy to position the detector for comfortable operation.

Who Is the Teknetics EuroTek Pro Best For?

The Teknetics EuroTek Pro is an excellent choice for:

• Relic hunters

• Coin shooters

• Jewelry hunters

• Iron-infested sites

• Park and field detecting

• Detecting in mineralized soil

• Beginners wanting advanced audio features

• Experienced detectorists looking for a lightweight detector

Technical Specifications

What's Included

• Teknetics EuroTek Pro Metal Detector

• 11" DD Waterproof Search Coil

• Adjustable Search Shaft

• Ergonomic S-Handle

• Search Coil Hardware

• 9V Battery

• User Manual

Why Choose the Teknetics EuroTek Pro?

The Teknetics EuroTek Pro is built for detectorists who want more control over iron and target audio without moving to a heavier or more complicated detector.

Its 7.81 kHz operating frequency, 11" DD waterproof coil, adjustable FeTone, V-Break, Iron Identifier LED, adjustable discrimination and sensitivity, pinpoint function, and lightweight 2.4 lb design make it a versatile detector for coin, jewelry, and especially relic hunting.

For sites containing significant amounts of iron, the combination of FeTone and Iron Identifier gives you additional information that can help separate potentially valuable targets from unwanted iron.